The Tramex Concrete Moisture Encounter 5, the updated CME4 Concrete Moisture Encounter, is a non-destructive analog concrete moisture meter for measuring quantitative moisture content in concrete floors and slabs. The Concrete Moisture Encounter 5, CME5, determines this instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. This moisture meter for concrete tests the concrete to a depth of approximately 20mm (3⁄4") into the slab.
The CME5 concrete moisture meter also provides readings for gypsum floor screeds as well as comparative readings making this moisture meter suitable to perform a concrete moisture test as per ASTM F2659.
The CME5 is a top quality moisture meter for concrete and an essential tool for non-destructive testing of concrete for professionals in the concrete coatings or flooring industry to help prevent moisture problems on concrete floors.
Concrete Moisture Meter Features
- Non-destructive in operation with no need to probe, drill or mechanically damage the surface.
- Clear easy-to-read analog dial.
- Instant and precise readings to a depth of approximately 3⁄4" into the slab.
- Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.
- Hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.
- Reproducible and reliable results.
- Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
- Rugged ergonomically designed enclosure.
Concrete Moisture Meter Design
The Tramex Concrete Moisture Encounter CME5 detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Tramex CME5 concrete moisture meter determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear analog dial.
Concrete Moisture Meter - Operating procedure
To carry out tests simply brush any dust from a smooth area of concrete and also from the electrodes, switch on the CME5 concrete moisture meter and place it firmly onto the surface, fully compressing the spring-loaded, signal-enhancing contacts on the base. Read the moisture content from the clear analogue dial. The Tramex Concrete Moisture Encounter CME5 is calibrated to give percentage moisture content readings on clean, bare dust free concrete floor slabs, with a depth of penetration of approx. ¾" (20 mm). Readings taken on concrete slabs through paint, coatings, adhesives or other materials on the surface should be regarded as qualitative or comparative and not quantitative.
| Size: | 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) |
| Weight: | 12.1oz (344g) |
| Construction: | ABS Body |
| Power: | 2 x AALR6 ALKALINE (included) |
| Display: | Analog |
| Depth of penetration: | approx. ¾" (20 mm) |
Measuring range:
| Moisture Content for Concrete: | 0 to 6% |
| Comparative for Gypsum floor screed: | 0 to 10 |
| Reference scale: | 0 to 100 |
You may also like
Recently viewed
