SamaN - Water-based Varnish

SamaN Water-Based Varnish is renowned for providing a clear finish of the highest quality. The unique urethane formula was specially developed by the SamaN team to offer twice the durability of conventional varnishes.

SamaN Water-Based Varnish is ideal for commercial and residential floors, as well as furniture, moldings, cabinets, doors, and other high-traffic surfaces.

Offering excellent abrasion resistance due to its aluminum oxide formula, this varnish features a special self-leveling, anti-yellowing formula, and quick drying properties. Additionally, SamaN offers a 15-year warranty on the product.

Available in various formats to suit your needs, we provide several shades of water-based varnish in matte, satin, semi-gloss, and gloss finishes.

Advantages:

• 2X more durable than traditional water-based varnish
• Self-leveling formula
• Anti-yellowing
• Quick drying for a beautiful clear finish

Types of Projects:

• Commercial and residential floors
• Furniture, moldings
• Cabinets
• Doors

Application:

• High-quality brush
• Lint-free roller (5-6mm)
• HVLP paint gun

Instructions

Preparation:

Ensure SamaN Water-Based Varnish is at room temperature (between 15 and 30 degrees Celsius). Stir well with a stick to ensure any settled material at the bottom of the container is thoroughly mixed into a uniform blend before starting.

Surface Preparation:

The surface to be varnished must be clean, free of dirt, dust, grease, residual wax, and any other visible imperfections. Ensure the surface is dry before applying the varnish.

Bare wood: Sand with fine 120 or 150 grit sandpaper. Do not use steel wool or other products that could damage the wood. Vacuum residue and dust, then wipe with a clean, dry cloth.

Previously varnished wood: The surface must be clean and free of dust, wax, grease, mold, and moisture. Ideally, wash the surface with SamaN's TSPeco product or another concentrated degreasing product, then lightly sand with 150 grit sandpaper. Ensure the surface is completely dry before applying varnish.

Stained wood: Ensure the surface to be varnished is completely dry to prevent pigment from stained wood from bleeding into the varnish, which could result in an uneven finish.

Application:

Apply 2 to 3 uniform coats of SamaN Water-Based Varnish, following the wood grain. Use a high-quality brush, lint-free roller, or HVLP paint gun.

Between each coat:

• Allow 1 to 2 hours drying time between coats.
• Lightly sand between each coat with 180 grit sandpaper.
• Vacuum dust and wipe with a clean, damp cloth to remove residue.
• Repeat this process between each coat of varnish applied.

Normal drying time:

• Allow 1 to 2 hours drying time between coats (drying time may vary depending on room temperature and humidity levels).
• Wait 24 hours after applying the final coat of varnish before allowing light traffic.
• Wait one week for heavier traffic or placing rugs.
• It is advisable to wait 10 to 15 days before cleaning the surface with cleaning products.

Tool Cleaning:

Clean all tools and equipment used with hot, soapy water immediately after use.